


AQUASURE +FD 28 g - GEAR AID
AQUASURE+FD is a polyurethane-based adhesive/sealant for repairing medium-weight coated fabrics (Cordura) and neoprene. From the SEAM GRIP / AQUASURE group, it has a medium viscosity, creates a 1 mm thick layer of PU rubber, which is self-supporting, elastic and flexible. The adhesive is perfectly waterproof. It allows patchless bonding, butt fusion and also reconstruction of missing material in a hole with a diameter of 20 mm. When bonding inflatable boats and mattresses (pressurized cylinders), a patch covering is necessary from a strength point of view. AQUASURE+FD is suitable for patchless bonding of damaged self-inflating mattresses.
Instructions for use: Apply directly from the tube, set in 2 hours, polymerizes to full structural strength in 12-24 hours. COTOL 240 or COTOL 240 HV can be used as an accelerator. At temperatures above 20 °C, polymerization is significantly accelerated by an environment with high relative humidity (90–100%).
Safety information:
DANGER
Contains xylene, 4,4-methylenediphenyl diisocyanate, tosyl isocyanate
Flammable liquid and vapor. Irritating to skin. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If breathing difficulties occur: Call a POISON CENTER/doctor. In case of fire: Use water spray, dry chemical, foam, carbon dioxide to extinguish. Dispose of contents/container in accordance with hazardous waste regulations.
Packaging: Tube with a content weight of 28 g
Manufacturer: McNETT Europe, Germany
Materials
